With the development of the current market, roller conveyor becomes more more important in the transportation equipment industry. The conveying distance is long the conveying capacity is large. It can also carry out single row conveying single row multi row conveying of beverage bottles. It is a good helper in the beverage industry. Widely used in major industries. The layout of roller conveyor is usually the vertical layout of assembly line machine line. The arrangement interval of roller conveyor should meet the conditions of reasonable, appropriate density, convenient operation, easy maintenance easy management. The price of roller conveyor is much more expensive than ordinary conveyor. This also shows that the roller conveyor is multifunctional, which means that the maintenance of roller conveyor is very important. We can carry out free roller conveying according to different conditions. The machine requires various levels of maintenance.

Maintenance of roller conveyor reducer:

Under normal conditions, after about three months of use, drain the oil in the gearbox, then clean the interior of the gearbox with diesel gasoline, immediately add new lubricant in the middle of the observation window. Change the oil every year now on. However, it should be noted that excessive lubricating oil may cause the gearbox to heat up, excessive motor load will cause the motor protection switch to trip. Too little lubricating oil will cause the gearbox to become hot, increase noise, hang the gearbox discard it.

Roller conveyor maintenance transformer maintenance:

Do use water to enter the motor, add diesel oil liquid other organic compounds in the motor, otherwise the insulation of the motor will be damaged the equipment will fail. Free roller conveyor accessories chain repair maintenance is also very important. After a long time of work operation, the chain will make the original lubricating oil heated volatilized, which will lead to imbalance, noise increase other faults in the operation process. For this kind of problem, you can open the sealing plate at the end of the machine add grease thick lubricating oil to the chain.

The operator of the roller conveyor shall carry out the relevant routine operation, the non operator shall touch the mechanical equipment at will. On the one hand, it is hardware maintenance, on the other hand, it is human operation. The combination of the two can make the service life of the roller conveyor longer bring better economic benefits to the production enterprises.