The main function of the unpowered drum is to transport goods by manually pushing the goods. The cylindrical part that drives the conveyor belt manually changes the running direction of the conveyor belt is one of the main accessories of the conveying equipment. So, if there is no power roller, what kind of abnormal problem of conveying equipment will appear? Next, Huzhou roller manufacturer will tell you what abnormal problems of conveying equipment will be caused by unpowered drum?

No power roller conveyor accessory conveyor belt slot difference, roller rotation is flexible, change into a good trough conveyor belt. If the early damage of the conveyor belt core is impacted by large sharp angle materials, it is necessary to pulverize the broken materials improve the discharge chute to reduce the impact of materials. There are lumps foreign matters between the conveyor belt the drum to prevent foreign matters falling into the conveyor belt the drum. The unpowered roller conveyor is caught by hard objects at the discharge chute, metal detection magnetic cleaning device is installed.

In addition, the conveyor belt conveying accessories may also be damaged due to longitudinal tearing. When the foreign matters of conveying materials fall down pierce the belt, check whether the rack accessories are loose at any time, correct the looseness in time. The frame is loose, the angle iron screw falls off, the baffle scraper are stuck, the tail wheel is installed with V-shaped scraper. The drum falls off after wearing, the baffle scraper are stuck, the tail wheel is installed with V-shaped scraper. Conveyor accessories roller wear off, installation of belt magnetic separator. When large foreign matters fall on the belt, electrical protection ultrasonic detection device shall be installed.

When conveying materials, the reason why the belt is easy to break is that the belt tension is too large, adjust the tension device to reduce the tension, the joint is firm, the quality of the belt buckle is poor. Connect replace the belt buckle. When it is used for a long time, the belt should be replaced with a new one. The maintenance quality of unpowered roller conveying equipment is poor, so the maintenance quality should be strengthened. It is normal for the machine to have some conditions in use. Especially when the method of use is wrong overused, it will more less produce some faults, some machinery is particularly old should be replaced.