Because the design of roller assembly line is more flexible, different shapes of assembly line can be designed according to the production line, so more more enterprises use it. With the increasing number of applications, there are more more problems in use, such as the phenomenon of roller jam. In order to ensure the smooth use of drum assembly line, people should pay attention to the repair maintenance of equipment parts every day.

The head motor is the power source of the drum assembly line. When using, please pay attention to waterproof, otherwise the insulation layer is easy to be burned cause failure. People need to carry out repair maintenance work according to its instructions, regularly check the damage of each part. If the parts are seriously worn, they should be replaced in time. The head also has a gearbox assembly which is used to adjust the speed of the drum in the drum assembly line. There is a fuel tank in the transmission, which is cleaned regularly. Usually, it is cleaned every three months. If the equipment is used frequently, the cleaning cycle should be shortened according to the situation. When cleaning, it is necessary to drain the internal oil. After cleaning the oil tank, put in an appropriate amount of cleaning oil.

The larger area of the roller assembly line is the roller assembly the chain that directly drives its movement. The chain is easy to heat up after long-term continuous operation. This is caused by friction, if allowed to generate heat, it will accelerate the wear of the chain. People should always check the amount of chain lubricant add lubricant in time. It is worth noting that we choose the right lubricant, otherwise the inferior lubricant may have an adverse effect on the drum assembly line.

Each roller assembly line will have the above three types of rollers, which play different roles. The driving roller is directly driven by the power equipment, which is mainly used to assist the transportation of goods. The driving roller is forced to rotate forward, the friction between it the goods will drive the goods to move. Therefore, the rotational speed of the driving drum the friction coefficient between the driving drum the goods will affect the rotational speed of the goods, that is, the transportation speed of the drum assembly line. People can change the transportation speed of the whole roll assembly line by designing drive rolls with different diameters packaging different materials on the rolls.

As mentioned earlier, the drum assembly line can be designed into a curved shape due to the reversing drum. As the name suggests, the reversing roller is a component used to change the direction of transportation. It does transmit electricity to the goods themselves, but only controls the direction of transportation. Just like the steering wheel in a car, it controls the direction of the roller assembly line, the driving roller will assist in the transportation of goods. There are many additional rollers on the surface of the roller assembly line. They have no power drive, but only increase the contact area between the driving roller reversing roller the goods, reduce the pressure of the goods on them.